If the plunger stays in the slide, turn it upside down and give it a shake until the plunger comes out. (see figure 4) That assembly will include the plastic bearing on the back, the spring, and the metal shaft of the plunger itself. Step 3.As you look into the firing pin channel from the rear of the slide, you’ll notice a small spring and plastic bearing protruding from a hole to the right of the firing pin channel. Pull on this spring and you should remove the extractor depressor plunger assembly as one piece. Grab the back of the spacer sleeve and remove the firing pin assembly from the slide. Step 2.With the cover plate removed, gently release the tension on the spacer sleeve. ![]() (see figure 2) Sometimes, the firing pin or plunger assembly will want to jump out of the slide, so be careful. This unlocks the back cover plate, allowing you slide it out of the back of the slide with your thumb. (see figure 1) It is accessible from underneath the slide. Step 1.Use a Glock modification tool, or other rigid rod about 1/8th inch in diameter, to press the back of the spacer sleeve toward the muzzle and hold it in place. If you will be re-using your old internals, we’ll first go through the disassembly of your old slide. If you are thinking about purchasing new internal parts, check out our Slide Completion Kit. Channel liners are a one-time use part so removing your old one and re-using it is not feasible. There is nothing wrong with using the parts from your old slide, but if you choose to do so, be sure to purchase a new channel liner. Now then, you must decide if you are reusing your internal parts from your old slide (if you have one) or purchasing new internals for your Glock slide modification. ![]() Caliber change (when paired with the appropriate barrel).Tighter tolerances to improve accuracy, especially when paired with a replacement barrel.A machined mounting surface for the addition of a red dot sight.Improved serration locations and patterns to help with slide manipulation.This is one of the most costly modifications you can make, but there are a variety of possible benefits, many of which are not well understood by those who scoff at Glock slide work such as slide replacement: Let’s talk about replacing your stock Glock slide.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |